Insignia NS-BRDVD User Manual page 30

Audio menu
BD Audio Mode Selects whether to play the secondary (PIP)
audio (when available) with the primary audio
or only the primary audio. You can select:
• Mix Audio Output plays both the
primary and secondary audio.
• HD Audio Output plays the primary
audio only.
Note: For Blu-ray Discs, select HD Audio
Output to play Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS, or DTS-HD audio through
the HDMI jack.
HDMI Audio Out Selects the audio format for the audio from the
HDMI OUT jack. You can select:
• HDMI Multi (Normal) selects
multi-channel audio with bitstream or
LPCM.
• HDMI Multi (LPCM) selects
multi-channel audio with LPCM.
• Audio Mute turns off the audio from the
HDMI OUT jack and turns on the audio
from the DIGITAL OUT jack.
Notes:
HDMI Multi (Normal) and HDMI Multi (LPCM)
are not available if:
• An HDMI cable is not connected to
HDMI OUT jack.
• The connected TV is off.
• The connected TV is not compatible
with the audio output.
When Audio Mute is selected, the audio signal
output from DIGITAL OUT jack changes
depending on Digital Out setting.
• Bitstream—When playing back discs
recorded in Dolby Digital, Dolby Digital
Plus, Dolby TrueHD, DTS, or DTS-HD,
the corresponding core stream (Dolby
Digital or DTS) is output.
• LPCM—An LPCM signal is output from
the DIGITAL OUT jack.
The Digital Out setting is not effective when
the HDMI audio signal is output.
Down Sampling Selects the digital audio output when playing a
Blu-ray Disc or DVD recorded in LPCM. You
can select:
• On—Converts LPCM signals to 48 kHz
for output. Select On when using digital
connections to an AV amplifier that is
not compatible with sampling
frequencies of 96 kHz.
• Off—For discs recorded in LPCM
without copyright protection,
two-channel audio signals up to 192
kHz are output as LPCM signals with no
conversion.
28
DRC
Virtual Surround
Parental menu
BD Rating Level
DVD Rating Level Sets the rating level for DVDs. For more
Password Change Changes the parental control password. For
Others menu
Angle Icon
Auto Power Off
www.insignia-products.com
Insignia NS-BRDVD Blu-ray Disc Player
Sets whether to compress the range of sound
volume (dynamic range control) when Dolby
Digital, Dolby Digital Plus, or Dolby TrueHD
audio is played back. You can select:
• Auto—When the discs recorded in
Dolby TrueHD format are in played, your
player detects the DRC setting of the
disc and set the DRC setting to On or
Off automatically.
• Off
• On
Selects whether to create a surround effect in a
system with two speakers connected. You can
select:
• Off—Virtual surround is set to off.
• 1—Creates a natural surround effect.
• 2—Creates a stronger surround effect
than 1.
Notes:
• Set the Virtual Surround setting to Off
or lower the volume if the sound is
distorted.
• For virtual surround, the audio signal is
always two-channel LPCM.
Sets the rating level for Blu-ray Discs. For more
information, see "Setting parental controls" on
page 23.
information, see "Setting parental controls" on
page 23.
more information, see "Changing the parental
control password" on page 24.
Turns the angle icon on or off. The angle icon
appears when a Blu-ray Disc or DVD is playing
a scene with multiple viewing angles. You can
select On or Off.
Selects whether your player automatically
turns off after more than 30 minutes of no
activity. You can select On or Off.