DFI-ITOX G4S300-B User Manual page 59

3.1.1.4 Drive A and Drive B
These fields identify the types of floppy disk drives installed.
None
360K, 5.25 in. 5-1/4 in. standard drive; 360KB capacity
1.2M, 5.25 in. 5-1/4 in. AT-type high-density drive; 1.2MB capac-
720K, 3.5 in.
1.44M, 3.5 in. 3-1/2 in. double-sided drive; 1.44MB capacity
2.88M, 3.5 in. 3-1/2 in. double-sided drive; 2.88MB capacity
3.1.1.5 Video
This field selects the type of video adapter used for the primary
system monitor. Although secondary monitors are supported, you
do not have to select the type. The default setting is EGA/VGA.
EGA/VGA Enhanced Graphics Adapter/Video Graphics Array.
CGA 40
CGA 80
Mono
3.1.1.6 Halt On
This field determines whether the system will stop if an error is
detected during power up. The default setting is All Errors.
No Errors The system boot will not stop for any errors de-
All Errors The system boot will stop whenever the BIOS de-
All, But Keyboard The system boot will not stop for a key-
All, But Diskette
All, But Disk/Key
No floppy drive is installed
ity
3-1/2 in. double-sided drive; 720KB capacity
For EGA, VGA, SVGA and PGA monitor adapters.
Color Graphics Adapter. Power up in 40-column
mode.
Color Graphics Adapter. Power up in 80-column
mode.
Monochrome adapter. Includes high resolution
monochrome adapters.
tected.
tects a non-fatal error.
board error; it will stop for all other errors.
The system boot will not stop for a disk er-
ror; it will stop for all other errors.
The system boot will not stop for a disk or
keyboard error; it will stop for all other er-
rors.
BIOS Setup
59
3