Control Panel - Zanussi ZDTS 102 User Manual

• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of
the appliance.

Control panel

1 On/off button
2 Programme selection/cancel button (Cancel)
3 Indicator lights
4 Programme indicator lights
End-of-programme
1)
Salt
1) When the salt container is empty, the related indicator light does not come on while a washing programme operates.
Programme selection/cancel button
Use the programme selection/cancel button for these op-
erations:
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Indicator lights
Comes on when the washing programme is completed. Auxiliary functions:
• Level of the water softener.
• Activation/deactivation of the audible signals.
• An alarm if the appliance has a malfunction.
Comes on when it is necessary to fill the salt container. Refer to 'Use of
dishwasher salt'.
After you fill the container, the salt indicator light can continue to stay on for
some hours. This does not have an unwanted effect on the operation of the
appliance.
• To set the washing programme. Refer to the chapter
'Setting and starting a washing programme'.
Warning! Carefully obey the instructions for
electrical and water connections.
3