Table of Contents
Advertisement
Adding Charcoal/Wood
During Cooking
•
Always allow grill to cool completely before handling.
•
Never leave coals and ashes in grill unattended.
•
Before grill can be left unattended, coals and ashes must be removed from cooker. Use caution to protect yourself and
property. Place remaining coals and ashes in a noncombustible metal container and completely saturate with water.
Allow coals and water to remain in metal container 24 hours prior to disposing.
•
Extinguished coals and ashes should be placed a safe distance from all structures and combustible materials.
•
Cover and store grill in a protected area, out of reach of children.
& Maintenance
5
AFTER-USE SAFETY
WARNING
Proper Care
•
•
•
Additional charcoal may be required to maintain or increase
cooking temperature.
NOTE:
Dry wood burns hotter than charcoal so you may want to
increase the ratio of dry wood to charcoal to increase the
cooking temperature. Hardwoods such as oak, hickory,
mesquite, fruit and nut wood are an excellent fuel because
of their burning rate. When using wood as fuel, make sure
the wood is seasoned and dry. DO NOT use resinous wood
such as pine as it will produce an unpleasant taste.
1. Wearing oven mitts, remove food and cooking grill and
set aside.
2. Stand back a safe distance and use long cooking tongs to lightly
brush aside ashes on hot coals. Use long cooking tongs to add
charcoal and/or wood, being careful not to stir-up ashes and
sparks.
WARNING:
Never add charcoal lighting fluid to hot or even
warm coals.
3. When charcoal is burning strong again, place the cooking grill on
charcoal pan.
4. Place food on the cooking grill and allow to cook.
Wash the charcoal pan and cooking grill with hot, soapy water, rinse
well and dry. Lightly coat cooking grill with cooking oil or pan spray.
If rust appears on the exterior surface of your cooker, clean and buff
the affected area with steel wool or fine grit emery cloth. Touch-up with
a good high-temperature resistant paint.
Never apply paint to the interior surface. Rust spots on the interior
surface can be buffed and cleaned.
Advertisement
Table of Contents
