Changing The Display; Setting The Auxiliary Data Field Display (Xm Only) - Alpine iDA-X303 Quick Reference Manual

Changing the Display
Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or Sirius channel. The
unit can display this text information as explained below.
In XM or SIRIUS mode, press VIEW.
Each time you press this button, the display changes as shown
below.
XM mode:
The XM Auxiliary Data Field (ADF) display can be switched on or off.
There is no ADF function for the SIRIUS receiver.
Setting the Auxiliary Data Field Display
(XM only)
Press and hold FUNCTION/SETUP for at least 2
seconds to enter the Setup mode.
Turn the Double Action encoder to select the
TUNER mode, and then press Q./ENTER.
Turn the Double Action encoder to select XM
ADF, and then press Q.IENTER.
Turn the Double Action encoder to select ONI
OFF, and then press Q./ENTER.
When setting to ON, Auxiliary Data Field is displayed by
pressing VIEW (Refer to the "Changing the Display" section
page 28.)
Press and hold ~ for 2 seconds to return to
normal mode.
5
3
4
2
1
Channel No.
Channel Name
.----------,*1
Channel No.
~
Auxiliary Data Field
Calendar
Clock
Channel No.
~ Category
Song title
Artist title
Channel No.
Channel Name
SIRIUS mode:
• Pressing ~ during the procedure will retllrn to the previous mode.
• If no operation is peifonned for 60 seconds. the unit will return to
normal mode automatically,
Channel No.
Channel Name
Channel No.
Category
Song title
Artist title
Song title
Composer name
Calendar
Clock
Channel No.
Channel Name
*1
When ADF is tlIrned OFF. this information is not displayed (see
"Setting the Auxiliary Data Field Display (XM only)" on [Jage 28.
• When the "Scroll Setting (TEXT SCROLL)" (page 23) is set to
"AUTO ", the channel name and song title scrolls continuously. When
the Scroll Setting is set to "MANUAL". the song title scrolls only
once.
• Depending on the model. the display may differ from the one shown
above.
28-EN