Viewing The Last Measurement Results - Omron HBF-202 Instruction Manual

HBF-202-AUW_A_M.fm Page 23 Monday, November 22, 2010 4:35 PM

VIEWING THE LAST MEASUREMENT RESULTS

If you want to display the last (previous) measurement result, press the GUEST/MEM button.
Press the GUEST/MEM button again to return to the current measurement result.
You can also view the previous measurement result without measuring your body composition.
The power comes on and then after 0.0 kg is displayed, press the GUEST/MEM button to select a
Personal Profile Number.
In this case display changes automatically.
Buttons Used in this Procedure
MODE/SET Button
Press this button to cycle through
the last (previous) measurement
values.
USER Button
Press this button to select the
Personal Profile Number.
1. Press the ON/OFF button to turn on the power.
2. Press the USER button until your own Personal Profile
Number is displayed.
Wait until 0.0 kg appears on the display.
3. Take a measurement.
If you want to compare the results with the last
(previous) values, measure your body composition.
4. Press the GUEST/MEM button.
The last weight value is displayed.
If you have measured your body composition in step 3, each time you
press the GUEST/MEM button, it will alternate between the current
measurement result and the last (previous) result.
NOTES:
• If there are no results for the last measurement, the "- - - -" symbol is displayed.
• If you have not measured your body composition in step 3, current measurement results cannot be
displayed even if you press the GUEST/MEM button.
GUEST/MEM Button
Press this button to display the last
(previous) weight value and
alternate between the current
measurement result and the last
measurement result.
23