How To Take A Measurement - Omron HBF-202 Instruction Manual

HBF-202-AUW_A_M.fm Page 19 Monday, November 22, 2010 4:35 PM

HOW TO TAKE A MEASUREMENT

Measurement should be taken on level and hard surface.
NOTES:
• Even if you do not have personal data information stored on the unit, you can use Guest mode to
measure body composition.
• Do not place the unit on a cushioned floor surface such as a carpet or mat. A correct measurement may
not be possible.
1. Press the ON/OFF button to turn on the power.
"8888" blinks on the display, then the display changes to 0.0 kg.
Wait until 0.0 kg appears on the display.
NOTES:
• Do not step onto the unit or move it until 0.0 kg appears on the
display. An error message "Err" may appear.
• Even if "0.0 kg" appears, do not step onto the unit when you measure
your body composition. Follow the step 2 of the procedure to select a
Personal Profile Number or the Guest mode.
2. Select a Personal Profile Number or the Guest mode.
A. Personal Profile Number
Press the USER button until your own Personal Profile Number
is displayed.
The display changes with each button pressed and the next
profile number is displayed.
Wait until 0.0 kg appears on the display.
NOTE: If the age "40" blinks, your personal data have not been
registered. Please re-register the personal data information.
(Refer to SETTING PERSONAL DATA on pages 14 and
18.)
B. Guest mode
1) Press the GUEST/MEM button.
The GUEST symbol appears and the age "40" blinks on the
display.
2) Enter your personal data. Refer to SETTING PERSONAL
DATA on pages 15 and 16.
19