Figure 2 is a cut-away side view of the N2125 printer that shows the major components that are
directly related to the paper path.
Figure 2 Cut-away Side View of the Printer Showing the Paper Path
Initial Issue
DocuPrint N2125
GP 3.3 Drive Flow
As shown in Figure 1, the Drive Gear Assembly takes the mechanical energy that is created by
the Main Motor Assembly and transmits it to four printer subsystems; the Turn Clutch Assem-
bly, the drum gear, the Fuser Assembly and the Optional Envelope Feeder Assembly. The Exit
Motor Assembly provides the power needed by the exit component. The pages following this
figure show each drive section in greater detail.
Figure 1 Drive Flow Through the Printer
02/2000
6-29
General Procedures / Information
GP 3.1 , GP 3.2