Gp 2.8 Entering Download Mode - Xerox DocuPrint N2125 Service Manual

Table 2 Component Menu Table
Menu Item
Confirm Trn Roll Clutch
Confirm Reg Clutch
Charge Roll DC Operation
Charge Roll AC Operation
Dev Bias DC Operation
Dev Bias AC Operation
BTR - Operation
BTR + Operation
Detack SAW
Duplex Motor Hi Operation
Duplex Motor Low Operation
Exit Motor Fwd Operation
Exit Motor Rev H Operation
Exit Motor Rev L Operation
Main Motor Operation
Fan Motor Hi Operation
ROS Motor Operation
OCT Motor Operation
OCT Offset Motor Operation
Stop All Tests Operation
LASER Diode Operation
IOT ROM Checksum
Paper Tray Size Reading
Initial Issue
DocuPrint N2125
Comment
Press "0" or "4" to stop motor
Press "0" or "4" to stop motor
Press "0" or "4" to stop motor
Press "0" or "4" to stop motor
Press "0" or "4" to stop motor
Main motor remains on for 5 minutes, or Press
"0" or "4" to stop motor
Press "0" or "4" to stop motor
Press "0" or "4" to stop motor
Press "0" or "4" to stop motor
Terminate all component tests
Check sum displays for 5 seconds
Press key 4 to scroll through different tray -
press key 0 to exit

GP 2.8 Entering Download Mode

1. Power down printer.
2. Press and hold keys 1 and 5 as you switch printer power on.
3. Wait for message "Entering Down Load Mode" to appear on the LCD.
4. Release both keys.
5. From the PC in DOS command mode. Change directory to where the program file
resides.
6. Type: mode LPT1:,,p
7. Type: C:\file_directory\.copy \b filename LPT1: then press "Enter".
8. Data LED should light up, and LCD should display "Downloading. Please Wait."
9. Wait for message "Down Load Completed. Please reboot." to appear on the LCD. All
LEDs should be cycling for about 5 seconds then go off.
10. Task completed. Power off, power on.
02/2000
6-21
General Procedures / Information
GP 2.7 , GP 2.8