Selecting The Digital Audio Output Mode - Insignia NS-BRDVD4 User Manual

Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
4 Press
you want. You can select 48KHz, 96KHz, or Off.
If you do not have a surround sound receiver connected to your player
through one of the digital audio jacks (optical or coaxial), select 48kHz.
Otherwise, select the highest sampling rate the receiver supports. See
the documentation that came with the receiver.
5 Press

Selecting the digital audio output mode

To select the digital audio output mode:
1 Press ENTER. The Settings menu opens.
2 Press
opens.
3 Press , press
4 Press
ENTER. You can select:
•
•
or one or more times to select the PCM downsampling rate
Note
to go to the previous menu.
or to select Audio, then press ENTER. The Audio menu
or to select Digital Output, then press ENTER.
or to select the digital output mode you want, then press
PCM—Sends a PCM audio signal of up to 7.1 channels over the
HDMI connection and up to 5.1 channels over the coaxial or
optical connection.
Bitstream HD—Lets your player send Dolby TrueHD or
DTS-MA bitstreams over HDMI (if your player is connected to a
compatible HDMI audio receiver). If your player is not
connected to a compatible HDMI receiver (for example, your
player is connected directly to the TV or your player is
connected to an audio receiver using an optical or coaxial
cable), a compatible audio signal is automatically sent over the
www.insigniaproducts.com
Setting the optical or coaxial audio output's PCM downsampling
sampling rate too high may result in unpredictable audio
playback. If you are not sure, set the rate to 48kHz.
35