Back - Insignia NS-BRDVD4 User Manual

Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
# Item
5
(stop)
6
(previous)
7
(next)
8
(standby/on)

Back

# Item
1
Power connector
2
USB port
3
ETHERNET jack
4
HDMI OUT
5
VIDEO OUT
6
COMPONENT VIDEO OUT
7
AUDIO OUT L/R
8
OPTICAL DIGITAL OUT
9
COAXIAL DIGITAL OUT
Description
Press to stop playback.
To resume playback, press
then press ENTER. Depending on the disc, playback starts where it
stopped or at the beginning of the disc.
If you press (stop) twice, playback stops completely. To start
playback again, press
Press to go to the previous title, chapter, or track.
Press to go to the next title, chapter, or track.
Press to turn on your player or put your player in standby mode.
When your player is in standby mode, power is still entering your
player. To disconnect power, unplug the power cord.
Description
Plug the power cord into a power outlet.
Plug a USB flash drive into this port.
Connect an ethernet cable to this jack and to a broadband Internet
jack to access BD-Live information or run connected applications.
Connect a TV to this jack using an HDMI cable. An HDMI cable carries
both video and audio.
Connect a TV to this jack and to the AUDIO OUT L/R jacks using a
composite video cable (provided).
Connect a TV to these jacks and to the AUDIO OUT L/R jacks using a
component video cable and audio cable.
Connect the audio for a composite TV or component video TV to
these jacks.
Connect an optical home theater system to this jack to play the
sound through the home theater system's speakers.
Connect a coaxial home theater system to this jack to play the sound
from the TV through the home theater system's speakers.
www.insigniaproducts.com
or to select DVD/BD-ROM,
(play/pause).
9