Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
3 Press
opens.
4 Press
5 Press
•
•
•
6 Press
Using the network test
Test the connectivity of your player's configuration by pinging an IP
address.
To test the network:
1 Press ENTER. The Settings menu opens.
2 Press
or
to select Wired, then press ENTER. The IP Settings screen
IP Settings
Link Status
MAC Address
IP Mode
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Apply
or
to select IP Mode, then press ENTER.
or
to select an IP mode. You can select:
Dynamic—Uses DHCP to automatically obtain an IP address.
Manual—Lets you manually configure network settings, such
as IP address, subnet mask, and gateway settings.
Off—Disables the network interface.
to go to the previous menu.
or
to select Network, then press ENTER.
www.insigniaproducts.com
Link Down
00:22:84:04:96:f1
Dynamic
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Cancel
47