Turning Film Mode On Or Off; Selecting The Pcm Downsampling Rate; Selecting The Digital Audio Output Mode - Insignia NS-WBRDVD User Manual

4 Press or to select
then press ENTER.
Pillarbox, 4:3 Pan & Scan, 4:3 Letter Box, or
16:9 wide.
Notes
• If your TV has a rectangular (16:9) aspect ratio,
choose one of the 16:9 aspect ratios. If your TV
has a square (4:3) aspect ratio, choose one of the
4:3 aspect ratios.
• Setting your player for one of the 16:9 settings
when connected to a 4:3 TV or setting your
player for one of the 4:3 settings when
connected to a 16:9 TV will produce
unpredictable results.
• In the standard-definition (576p/480p) mode,
your player has 16:9 and 4:3 aspect ratios. In the
high-definition (720p/1080i/1080p) mode, your
player has only 16:9 aspect ratio.
5 Press to go to the previous menu, or press
SETUP to close the menu.
changed to "to return to the root menu"?

Turning film mode on or off

Movies are recorded on film at a rate of 24 pictures
(frames) per second. Many of the movies on Blu-ray
Discs are recorded on the discs at this frame rate.
However, not all TVs can display 24 progressive
frames/second of video. If the TV cannot display
this frame rate, you need to turn off Film Mode
(1080p24).
To turn film mode on or off:
1 Press SETUP. The Settings menu opens.
Parental
System
Network
Set ting s
Display
Audio
Language
2 Press , press
press ENTER. The Display menu opens.
3 Press or to select Film Mode (1080p24),
then press ENTER.
4 Press or to select On or Off. Off selects a 60
frames/second output format.
5 Press to go to the previous menu, or press
SETUP to return to the root
14
the aspect ratio you want,
You can select 16:9
Should this be
Disp lay
HDMI Status C onnected
HDMI preferred Format 1080p
TV Type PAL
R es olution HDMI Auto
TV Aspect 16:9 W ide
Film Mode(1080p24) On
or to select Display, then
menu.
www.insigniaproducts.com
NS-WBRDVD Connected Blu-Ray Disc Player

Selecting the PCM downsampling rate

To select the PCM downsampling rate:
1 Press SETUP. The Settings menu opens.
System
Network
Display
Settings
Audio
Language
Parental
2 Press , press
ENTER. The Audio menu opens.
3 Press or to select PCM Downsampling,
then press ENTER.
4 Press one or more times to select the PCM
downsampling rate you want. You can select
48KHz, 96KHz, or Off.
• If you have a surround sound receiver
connected to your player through the SPDIF
jack, select the highest sampling rate the
receiver supports. See the documentation that
came with the receiver.
• If you do not have a surround sound receiver
connected to your player, select 48KHz.
• If you have a surround sound receiver
connected to your player through the analog
audio L and R jacks, select 48KHz.
• If you have a surround sound receiver
connected to your player through the HDMI
output, select 48KHz.
Note
Incorrectly setting the digital audio output's PCM
sampling rate may result in unpredictable audio
playback.
5 Press to go to the previous menu, or press
SETUP to return to the root

Selecting the digital audio output mode

To select the digital audio output mode:
1 Press SETUP. The Settings menu opens.
System
Network
Display
Settings
Audio
Language
Parental
2 Press , press
ENTER. The Audio menu opens.
3 Press or to select Digital Output, then
press ENTER.
Au dio
PCM Downsamp ling 48 K hz
Digital Output PCM
Dynamic Range Control Off
or to select Audio, then press
menu.
Au dio
PCM Downsamp ling 48 K hz
Digital Output PCM
Dynamic Range Control Off
or to select Audio, then press