ActionTec GT704WG User Manual page 15

5b. If
6. Optional - Select the
7. Click Apply at the bottom of the screen.
8. Read the instructions on the next screen. The Gateway is successfully
The Power light flashes rapidly while the Gateway restarts, then glows steadily
green when fully operational. The Internet light will also glow steadily green. The
Gateway is now configured and users can start surfing the Internet.
If an error appears, stating the Web browser was unable to connect to the Internet,
check the configuration settings. Ensure all the information required by the
entered correctly.
Downloaded from www.Manualslib.com
Actiontec 54 Mbps Wireless DSL Gateway User Manual
o was selected in step 5, select the
PPP E
[Default]" or "Single Static
ed, enter the address in the appropriate text box.
DNS
"Static Addresses"). If Static
DNS
mary and secondary
DNS
what to enter in this section, contact the
configured.
manuals search engine
type ("Dynamic
IP
Address"). If Single Static
IP
type ("Dynamic Addresses [Default]" or
DNS
Addresses was selected, enter the pri-
DNS
addresses in the appropriate text boxes. If unsure
.
ISP
10
IP-DHCP
Address was select-
IP
is
ISP