ActionTec GT704WG User Manual page 42

The "
WAN IP
☞
1. Select "
2. If using
3. Select the
4. Select the
Downloaded from www.Manualslib.com
Chapter 5 Configuring Advanced Settings
Address" screen appears.
WAN IP
Address allows manual set up of the
Note: Some providers use
DSL
tion with an end user. Other types of broadband Internet con-
nections (such as fixed point wireless) may use either
static address. If unsure which connection is present, check
IP
with Verizon before continuing.
" or " o
DHCP PPP
If Auto Connect is being used, click in the appropriate check box.
PPP
was selected in step 1, enter the user name and password in the
PPPoE
appropriate text boxes.
type. If single static
IP
"Single Static IP" text .
type. If static
DNS
address and, optionally, the secondary
boxes.
manuals search engine
address of the Gateway. To do this:
IP
o to establish communica-
PPP E
," depending on the type of connection the
E
was selected, enter the
IP
address was selected, enter the primary
DNS
address in the appropriate text
DNS
37
or
DHCP
uses.
ISP
address in the
IP
DNS