Qos Settings Upstream - ActionTec GT704WG User Manual

5. Select Dialout on-demand (optional).
6. Adjust
When finished in this screen, click Apply to activate any changes made.

QoS Settings Upstream

Selecting QoS Settings Upstream from the "Advanced Setup" screen causes the
"QoS Upstream Settings" screen to appear.
Downloaded from www.Manualslib.com
Actiontec 54 Mbps Wireless DSL Gateway User Manual
To have the Gateway automatically connect to the Internet whenever needed
(when a Web browser is opened, for example), activate "Dialout on-demand"
by clicking in the appropriate check box. When Dialout on-demand is acti-
vated, the user can also set the Gateway to disconnect from the Internet after a
certain amount of idle time (no Internet activity). To do this, enter the num-
ber of idle time minutes (minimum 2 minutes) before disconnection occurs
in the text box before "Minutes."
settings (optional).
MTU
Enter the maximum transmission unit (
box. This value corresponds to the largest physical packet size the network is
allowed to transmit. Packets larger than this size are divided into smaller pack-
ets. It is recommended to leave this value set at the default (1492).
manuals search engine
) value (in bytes) in this text
MTU
38