CDA EVC4 Installation And Maintenance Manual page 5

Changing the Halogen bulbs
IMPORTANT: DO NOT PERFORM MAINTENANCE
OR CLEANING OF THE EXTRACTOR WITHOUT FIRST
SWITCHING OFF THE ELECTRICITY SUPPLY.
DO NOT CHANGE THE LIGHT BULB IMMEDIATELY
AFTER USE AS THE BULB WILL BE HOT. ALLOW IT TO
COOL BEFORE REMOVING IT.
Open the base of the extractor as described above and then
press downwards on the light housing as shown in figure 5
before removing the bulb. Refit the new bulb taking care not
to touch the glass (Fingerprints will lead to premature failure
of the bulb).
Do not touch bulbs or adjacent areas during or straight after
prolonged use of the lights.
Fig. 5
4