Buffering Or Transferring Images By Sensor - Panasonic BL-C30C Operating Instructions Manual

2.14 Buffering or Transferring Images by Sensor

The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
1.
Click [Buffer/Transfer] on the Setup page.
2.
Click No. to enable buffer/transfer.
3.
Check [Enable Image Buffer/Transfer], select [Sensor] for trigger, and click
[Next>].
• Click [Delete Buffered Images] to delete this buffered images.
• Click [Save] to save the settings. The buffered images are deleted.
• Clicking [Cancel] takes you back to the Image Buffer/Transfer page without
saving changes.
Operating Instructions
69