Panasonic BL-C30C Operating Instructions Manual page 28

Operating Instructions
Notes
• Not all Cellular Service Providers permit this camera function. Check with your
Cellular Service Provider for compatibility.
• If the image is not displayed properly, try the following 2 URLs.
1. http:// IP address(or URL):Port Number/mobileh for HTML.
(or
2. http:// IP address(or URL):Port Number/mobilex for XHTML.
(or
• Only an administrator can control privacy mode.
• In privacy mode, sensor and timer image buffer/transfer features also are
stopped.
• When executing [Privacy Mode] while setting [Permit access from guest users]
on the Security: Administrator page (see page 49), an authentication window
is displayed. Log in to the camera as an administrator.
• If the users are restricted to level 1 or 2 on the General User page (see page
53), the users do not see some kinds of buttons.
• When pan/tilt reaches the end, the keypad number and character disappear.
e.g.: The pan reaches the left end.
• Some cell phones are not compatible with Panasonic Network Cameras.
Some phones may allow viewing only on port 80, and some may not support
password authentication. See the Panasonic Network Camera support
website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for a cell
phone model list, and the compatibility level which has been verified with the
Panasonic Network Camera.
• Some cell phones display images not at the specified resolution but at a
decreased size.
Stopping E-mail Transfer by Cell Phone Operation
Executing privacy mode on a cell phone operation can stop E-mail transfer.
1.
Access the camera from a cell phone (see page 27) and log in to the camera
as an administrator.
2.
Execute [Privacy Mode] (see page 27).
• The camera switches to privacy mode and stops E-mail transfer (Image
Buffer/Transfer).
28
.viewnetcam.com:50000/mobileh)
.viewnetcam.com:50000/mobilex)
"(4)L" disappears.