Connecting The Camera To Your Network - Panasonic BL-C30C Operating Instructions Manual

Operating Instructions
2.2

Connecting the Camera to Your Network

The Network page offers three options to configure the camera.
• [Automatic Setup] automatically assigns an unused IP address to the camera,
and uses UPnP
• [Static] allows the user to use a specific IP address.
• [DHCP] is offered for ISPs who require this option.
1.
Click [Network] on the Setup page.
2.
Select a connection mode.
• Each page is displayed (see page 32—page 33).
3.
Enter each parameter in the proper data field.
Automatic Setup
The camera automatically obtains the network settings (subnet mask, default
gateway and DNS server address) utilizing a DHCP feature on the router. The
camera also automatically searches the unused IP address on your network.
If you select [Yes] at Allow Access from the Internet, the camera automatically
enables port forwarding by using UPnP
automatically searches the unused port number on your network in the order
of 80 and from 50000 to 50050.
• Clicking [Cancel] takes you back to the previous page without saving
changes.
32
to configure your router.
TM
Normally sets Automatic Setup.
Uses a static IP address.
Uses ISP DHCP server function.
. In this case, the camera
TM