Installing The Camera Module And Lvds Cable - Toshiba NB250 Maintenance Manual

4 Replacement Procedures

Installing the Camera module and LVDS Cable

Install the camera module and LVDS cable according to the following procedures.
NOTE: Take extra care in routing cables and antennas on the LCD module. Improperly
routed cables can become pinched or damaged and cause malfunction.
1. Connect the LVDS cable to the connector on the back of the LCD module.
2. Adhere the LVDS cable in the correct position on the LCD module.
3. Connect the camera to the camera connector on the LVDS cable.
NB250/NB255 Maintenance Manual
4.15 Camera module LVDS cable
4-46