Camera Module Lvds Cable; Removing The Camera Module And Lvds Cable - Toshiba NB250 Maintenance Manual

4 Replacement Procedures
4.15

Camera module LVDS cable

Removing the Camera module and LVDS Cable

Remove the Camera module and LVDS cable according to the following procedures and
Figures 4.33 and 4.34.
1. Turn the LCD panel over and place it face down on a protective surface such as a foam
pad.
2. Disconnect the camera from the connector and remove it, as shown in Figure 4.33.
Figure 4.33 Removing the Camera from the LCD panel
NB250/NB255 Maintenance Manual
4.15 Camera module LVDS cable
4-44