Lcd Module; Removing The Lcd Module - Toshiba NB250 Maintenance Manual

4.14 LCD Module

4.14 LCD Module

Removing the LCD Module

Remove the LCD module according to the following procedures and Figures 4.31 and 4.32.
1. Remove four M2.5x4 screws securing the LCD module to the LCD cover assembly.
2. Pull up the camera from the LCD cover assembly without disconnecting it from the
connector.
NOTE: Camera module is fastened by adhesive tape. Remove it slowly and carefully.
Figure 4.31 Removing the screws from the LCD module
3. Lift the LCD module out of the LCD cover assembly and remove it.
NB250/NB255 Maintenance Manual
M2.5x5*4
4 Replacement Procedures
4-41