Toshiba NB250 Maintenance Manual page 168

4 Replacement Procedures
4. Remove four M2x3 screws that secure the LCD hinge assembly to the LCD panel and
then remove the LCD hinge assembly, as shown in Figure 4.32.
NOTE:
Integrated Circuits (ICs) are fragile. Use extreme care not to apply pressure to the ICs along
the edges of the LCD module.
Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances or
regulations.
NB250/NB255 Maintenance Manual
M2x3*4
Figure 4.32 Removing the LCD Hinge Assembly
4.14 LCD Module
4-42