Set Default; Put On Top; Properties Page - Button Type: General - AMX G3 Instruction Manual

Figure 164
BUTTON TYPE: GENERAL
options
Color Active-Matrix LCD Touch Panels
— Select this option and a button to store the default color, border,
ALL
and size in Touch Panel memory. These default settings are automatically
applied to all new buttons.

Set default

Press the SET DEFAULTS option and a button to automatically reset the button's
color, border, and size according to the default settings stored in Touch Panel
memory. You can use the SAVE DEFAULTS option to store new default settings in
Touch Panel memory.

Put on top

Press PUT ON TOP and a button to move the button in front of another button on
the current panel page. This option is useful when constructing multi-layered
buttons.
Properties Page — Button Type: General
Sets the button to automatically send a message to the AXCESS Central Controller
via the AXlink connector, to the PC via the RS-232 connector, or wireless receiver.
The button type General and associated options appear in the PROPERTIES page
as shown in Figure 164.
Button Type: General
options
Touch Panel Program Reference 97