Figure 68
BUTTON PROPERTIES
(JOYSTICK) page
Note
If you continued the
procedures from the Adding a
joystick to a page subsection,
this will be the button's
properties page when you
select it.
Figure 69
Joystick CHANNEL code
buttons
Note
The channel code for non-
active buttons is 0, and for
active buttons it's 1 through
255.
46
Designing a Touch Panel Page
Setting the channel code
The two fields to be set for the joystick channel code are DEV (device) and
1.
CHAN (channel) as shown in Figure 69.
Press DEV to open a keypad and set the joystick's device number.
2.
Type 1, 2, 3, or 4 in the keypad. The device number specifies the device
3.
number for the selected channel's feedback is displayed.
Press ENTER to store the device code in memory, close the keypad, and return
4.
to the BUTTON PROPERTIES page.
Press CHAN to open the keypad and set the channel number.
5.
Type in a channel value of 1 to 255 in the keypad. The AXCESS software
6.
program uses the channel code number to identify the button and programmed
operations.
Color Active-Matrix LCD Touch Panels