Ids - Motorola RFS Series Reference Manual

20.1.29 ids

Wireless Configuration Commands
Defines the Wireless Intrusion Detection System (WIDS) configuration
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
ids [anomaly-detection|detect-window|ex-ops]
ids anomaly-detection [all|bad-essid-frame|
beacon-broadcast-essid|deauth-broadcast-smac|
detect-adhoc-networks|invalid-8021x-frame|
invalid-frame-length|invalid-frame-type|
invalid-sequence-number|multicast-source|
non-changing-wep-iv|null-destination|
same-source-destination|tkip-countermeasures|
unencrypted-traffic|weak-wep-iv]
[enable|filter-ageout <ageout>]
ids anomaly-detection bad-essid-frame [<1-10> <info>|enable|
filter-ageout <ageout>]
ids detect-window <duration>
ids ex-ops [80211-replay-fails|all|association-requests|
authentication-fails|crypto-replay-fails|
decryption-fails|disassociations|eap-naks|eap-starts|
probe-requests|unassoc-frames] [filter-ageout <0-86400>|
threshold [mu|radio|switch] <0-65535>]
Wireless Instance 20-45