Taking Pictures - FujiFilm DL-320 ZOOM Owner's Manual

TAKING PICTURES

1. Turn on the power
To turn it on, set the Power Switch/Exposure Mode/Landscape Mode Dial to AUTO
so that the letters "AUTO" come opposite the Setting Mark (–). The Lens will move
forward, the Lens Cover will open and the camera will set itself to the automatic-
flash mode.
2. Zoom the lens
To zoom to telephoto, move the Zoom Lever to the right. To zoom to wideangle,
move the Zoom Lever to the left. The size of the Finder image will change with the
movement of the Lens.
•
Do not block the Lens or apply pressure to it while it is zooming.
•
If the camera is switched on and ready for shooting but is left idle for five minutes, the lens will
automatically move back into the body, the LCD signs will turn off, and the power will switch off
(unless you are shooting in the interval timer mode). To reset the camera for shooting, set the
Power Switch to OFF, then turn on the power again.
15