Advertisement
Taking Pictures
Do not open the back camera cover until all 10 film sheets
of the INSTAX SQUARE instant film pack have been used.
Opening the camera door will expose any remaining,
unused film sheets, rendering the remainder of the film
pack unusable.
1
Once the batteries are loaded, turn on the
camera by rotating the lens ring to ON.
The lens barrel extends and the flash charging lamp
blinks and then lights up. (Blinking indicates that the
flash is charging.)
2
Hold the camera, look through the viewfinder
of the camera to frame your desired
composition, and press the shutter button.
* The shutter button cannot be pressed while the
flash is charging.
3
When the sound of the film being ejected
stops, grasp the edge of the ejected film and
remove the photo from the camera.
The film counter decreases in numerical order,
counting down from "10" with each photo taken. "0"
will be displayed when the film is finished after the
last film sheet has been used (i.e. the 10th photo has
been taken).
4
When you have finished taking photos, turn off
the camera by rotating the lens ring to OFF.
If the camera malfunctions, remove the batteries while
the power is on and then reinsert them to reset the
camera.
7
Advertisement
