FujiFilm DL-320 ZOOM Owner's Manual page 9

2. Correcting the date (or time)
A : PRINT Sign (not printed on the picture)
2 Date Selecting Button
3 Date Setting Button
Make the number you want to change blink by pressing in the Button 2, then bring
out the number you want by pressing in the Button 3.
To set the Dating Unit Clock to the correct time, first set the time then make the
colon (:) blink by pressing in the Button 2.
Next, press in the Button 3 the instant the time announcement signals zero sec-
ond, then, press in the Button 2 once more to bring out the "PRINT" sign (-) in the
Date Display Window.
•
You can print dates on both standard and panorama format pictures.
•
Your camera's quartz dating unit will function as an auto-calendar up through the year 2024.
The dates (or time) are represented by the following numbers :
Year : 93-24(1993-2024)
Month : 1-12 Day
Hour : 0-23 Minute : 00-59
•
The numbers for the year, month, and day are interlocked with the numbers for the hour and minute.
•
When the shutter is released to take your picture, the "PRINT" sign in the Date Display Window
will blink for about two seconds to tell you the date has been printed on it.
•
If you press in the Date Setting Button and hold it there, the numbers will run through rapidly.
•
If any of the date numbers in blinking, the date will not be printed on your picture.
•
If a bright-colored background is included in the bottom right of your picture, the date will not
show up clearly.
: 1-31
9