Using The Self-Timer - FujiFilm DL-320 ZOOM Owner's Manual

USING THE SELF-TIMER

1. Set the self-timer
To set the self-timer, press in the Shooting Mode Button to bring out in the LCD the
Self-timer Sign ( ) and the number of picture you want to take with the Self-timer
(up to three shots).
2. Start the Self-timer
To start it, press down the Shutter Release. The Lens will automatically focus on the
part of your subject that is covered by the Finder's Autofocus Spot.
•
When you start the Self-timer, do not stand in front of the camera. If you do, you will either throw
the Lens out of focus or the picture may be underexposed.
•
The Self-timer has to be reset each time you take a picture.
•
To switch off the Self-timer, turn off the Self-timer Sign (
Button a second time.
3. Wait 10 seconds
As soon as the Self-timer starts, the Self-timer Lamp will turn on and glow for seven
seconds, then blink for three seconds, then the shutter will trip to take your picture.
The extra shots you inputted will be taken at 3-6 second intervals.
) by pressing in the Shooting Mode
29