Table of Contents
Advertisement
Taking Pictures
1
Turn the lens dial to turn on the power. Battery, film
counter, and (if set) color effects will light up on the
display.
* Flash icon (show above) will blink. While it is blinking,
the flash is charging and unable to shoot.
2
Confirm the composition and press the shutter button.
• Take care that the shoulder strap and/or fingers do not cover the flash light sensor, AE light sensor, flash lampface, lens,
or film ejection slot.
• When looking through the viewfinder, look from the front so that the
your subject.
• Viewfinder shading in macro mode does not affect shooting.
For vertical shooting, use the
shutter button on the front of
the camera.
For horizontal shooting, use
the shutter button on the
side of the camera.
3
The number on the film counter in the mode indicator
decreases from "10" and the number of remaining
shots is displayed, and when the film pack is used up,
"0" is displayed.
4
• The developing time is
approximately 90 seconds. (The
time varies depending on the
ambient temperature.)
After the sound of the film ejecting stops, hold the tip
of the ejected film and take it out.
mark in the viewfinder is visible in the center of
EN
Film counter
9
Advertisement
Table of Contents
