Setting The Clock - Sony CMT-SBT300W Operating Instruction

Setting the clock

Set the clock using the buttons on the
remote.
1
Press / (power)  to turn on
the system.
2
Press TIMER MENU  to select
the clock set mode.
If "PLAY SET" flashes, press / 
repeatedly to select "CLOCK," and then
(enter) .
press
3
Press /  repeatedly to set
the hour, then press
.
4
Use the same procedure to set
the minutes.
Note
The clock settings are reset when you disconnect
the power cord or if a power failure occurs.
To display the clock when the
system is off
Press DISPLAY  repeatedly to display the
clock. The clock is displayed for about 8
seconds.
If the system is in BLUETOOTH/Network
Standby mode, the clock does not appear
by pressing DISPLAY .
(enter)
17 GB