Setting The Clock - Sony LBT-N250 Operating Instructions Manual

okd
Setting the Clock
The built-in clock shows the time in the
display.
1 Keep pressing CLOCK SET until the
hour indicator begins flashing.
3
ea) rm
|
y
flashing
2 Set the current hour by pressing A or ¥
(CURSOR CONTROL) until the correct
hour appears.
_ flashing
3 Press CLOCK ENTER/NEXT .
The minutes indicator begins flashing.
4 set the current minute by pressing A or
V until the correct minute appears.
flashing
5 press CLOCK ENTER/NEXT.
Use the time signal to set the clock
accurately.
"OK" appears in the display and the
clock starts running.
Chapter 1: Setting Up
DISPLAY
To check the time while power is on
Press DISPLAY.
The current time appears for a few seconds.
To correct the clock setting
Repeat steps 1 to 5.
ay