SOYO SY-6VBA 133 User Manual page 91

Drivers installation
Step 3. Install Drivers
The following describes the best way of installing Windows 95 or Windows 98
on your 6VBA 133 Motherboard:
The following BIOS default settings should not be changed:
Ø
1. The 'OnChip USB Controller' item under 'Chipset features Setup' is set to enabled.
2. The 'USB Assigned IRQ' item under 'PnP/PCI Configuration is set to enabled.
You MUST have these two items enabled for Windows 95/98 to run properly on
your system.
Install Windows 95/98
Ø
If you installed Windows 95 you will now need to upgrade your USB driver
Ø
by running the following program on your Windows CD:
Win95/OSR2/Usbsupp/USBsupp.exe
After installation of windows, you will need to install the VIA drivers. Follow
Ø
the instructions below.
Click the Install drivers button to display the list of drivers that can be
installed on your Motherboard. The start-up program displays the drivers
available for the 6VBA 133.
Driver Installation
Please select the driver you want to install and click OK, Yu will have to
restart your system after installation. Only the drivers that are relevant
to your board are displayed initially.
VIA 4 in 1 driver package
6VBA 133 Winbond hardware doctor for win 95/98
Cancel
Display all drivers
on the SOYO CD
(Driver Installation Menu)
87
SY-6VBA 133
OK