Atx Power - SOYO SY-6VBA 133 User Manual

Hardware Installation SY-6VBA 133
2-3.3.6 AGP VGA Card
Insert the AGP VGA card into the AGP slot. Then connect the monitor
information cable to the AGP card back plane external connector.
Follow the manufacturer's instructions to perform the AGP VGA drivers
installation.
Other Display Cards: Insert other types of VGA cards into the PCI or
ISA expansion slots according to card specifications.
2-3.3.7 ATX Power Supply
Plug the connector from the power directly into the 20-pin male ATX PW
connector on the Motherboard, as shown in the following figure.

ATX Power

®
1
®
®
38