Kodak Hero 5.1 User Manual page 27

Problem
Printer not detected
www.kodak.com/go/aiosupport
Possible Solutions
■
Make sure your printer is plugged in and turned on.
■
If you are using a USB cable, make sure:
– it is a USB 2.0 high-speed cable.
– that the USB cable is connected to both your printer and
your computer.
– you restart the computer if the USB cable was
disconnected from the printer then reconnected, or if
power to the printer was interrupted.
■
If you are using a wireless connection, make sure:
– the printer is connected to your wireless network
To check:
a
On the printer, press Home.
b
Press
press OK.
c
Press
Configuration, then press OK.
d
Make sure that the Active Connection Type is Wi-Fi,
and that the IP Address is not 0.0.0.0.
– your router is transmitting data.
– the firewall (excluding WINDOWS Firewall) is allowing
the services needed for your printer.
For more information, go to
to select Network Settings, then
to select View Network
www.kodak.com/go/inkjetnetworking.
Troubleshooting
21