Controls At A Glance - Jenn-Air SVE47100 Instructions Manual

_ Controls at a Glance
The control panel is designed for ease in programming. The display window on the electronic control shows time of day,
timer and oven functions. Indicator words flash to prompt your programming steps.
Fan ,Cancel A Oven
Hi Off ¢...../ Light
Bake Br°ii Clean C°°k S't°P Cl°ck Timer Time _lme V
Lo
Electronic Clock Clean Pad
and Oven Control Use t oset s etf-_ean cycle.
Press the desired pad. l. Press Clean pad. "- - : - -" will appear in the display.
2. Press • or • pad. "3:00" hours of cleaning time will
Press, or press and hold, these pads to enter
time, oven temperature or to select HI or LO automatically be entered.
broil. 3. If more or less cleaning time is desired, press
I_Press this pad to cancel all operations except
Cancel
• or • pad to select times between 2 to 4 hours.
the TIMER and CLOCK. See pages 17-18 for additional information.
NOTE: If more than 30 seconds elapse between pressing a
function pad and a • or • pad, the program will be
Control Lockout Option
canceled and the display will return to the time of day.
The control touch pads can be locked to prevent unwanted
use. They will not function when locked.
Bake Pad
if an oven function is currently being used, the controls
Use for baking or roasting, cannot be locked.
The current time of day will remain in the display when this
1. Press Bake pad. feature is activated.
2. Press • or • pad until the correct oven temperature ap-
pears in the display. Setting Control Lockout:
See page 13 for additional information. 1. Press and hold the Stop Time and Cancel/Off pads at
the same time for three seconds. The control will beep
once indicating it is locked.
Broil Pad
, OFF will appear in the display for 15 seconds if any pad
Use for top browning and broiling, is pressed.
1. Press Broil pad. To Cancel: Press and hold the Stop Time and the Cancel/
2. Press • or • pad for H1 or LO broil. Off pads at the same time for three seconds. The indicator
word OFF will disappear in the display.
See page 15 for additional information.