Light Indicators Behaviors And Controls - Jenn-Air KFGC506JSS Use & Care Manual

USING YOUR OVEN
LIGHT INDICATORS, BEHAVIORS AND CONTROLS
The indicator lights illuminate and blink to show the status of the unit.
FUNCTION
Start Button
Temperature and Mode
Knob Indicator Light
Griddle Power Indicator
Light
(on 48" models only)
Griddle Preheat Light
(on 48" models only)
Wi-Fi Indicator Light
Remote Indicator Light
Oven Light Button
Cancel
14
USE AND LIGHT BEHAVIOR
Pulsing White Light
The start button will flash white to prompt the user to press start after the mode and setting have
been selected. If no action is taken after 2 minutes, a tone will sound and the unit will timeout
and return to idle mode. To exit idle mode, re-select a mode and setting before pressing start.
Quick-Blinking White Light
If an invalid knob combination has been chosen and the start button is pressed, the indicator
light will quickly blink and a tone will sound to indicate that the chosen selection is invalid. See
the model compatibility table on page 13 for valid selections.
NOTE: When the unit is on, mode can be changed between Bake, Convect bake, Convect Roast,
Broil and Convect Pastry. Press the start button to confirm a mode change.
Solid White Light
When a mode or setting is selected, and the combination is valid, the mode/setting indicator
light will illuminate white.
Solid Red Light
After a valid mode and setting have been selected and the start button has been pressed, the
indicator light will turn red when the preheat is completed.
Solid White Light
The light will turn solid white and a tone will sound when the preheat is complete. If there is no
preheat for a cycle, the preheat completes immediately and the light turns solid white.
Quick-Blinking White Light
If an invalid knob combination has been selected, the light will blink and a tone will sound
prompting the user to select a valid combination. The indicator light will continue to blink and a
tone will sound every 30 seconds until the error is fixed or the unit will timeout after 2 minutes of
inactivity and return to idle mode.
Pulsing Amber Light
The indicator light will pulse amber if the oven is undergoing a 100+ degree decrease in
temperature (i.e changing from Bake 450°F to Bake 350°F) or if the oven is too hot to properly
proof and needs to cool down.
Solid Blue Light
The griddle power indicator light illuminates blue when the griddle is powered on.
Blinking Blue Light
The griddle preheat light flashes blue while the griddle is preheating. Once preheat temperature
has been reached, the indicator light turns solid blue.
Solid White Light
The Wi-Fi indicator light illuminates white when the unit is Wi-Fi enabled allowing the user to
monitor the unit. All lights will turn off in idle mode even when the unit is connected to Wi-Fi.
Solid White Light
The remote indicator light illuminates white when the unit is remote enabled and the user can
send instructions to the unit. All lights will turn off in idle mode even when the unit is remote
enabled.
To Use
The oven button turns the interior oven light on and off. The button turns light on and off
regardless of whether the door is open or closed.
To Cancel
To cancel the oven operation and turn the oven off, move the temperature knob to the OFF
position.