Bios Utility; Boot Sequence; Setting Passwords - Acer GVM-1311Q User Manual

BIOS UTILITY
The BIDS utility is a hardware caafiguratiaa program built into yaur computer's BIDS.
Your computer is alreody properly configured aod optimized, aod you do oot normally
oeed to run this utility. However, if you encounter configuration problems, you may need
to run it.
To activate the BIDS utility, press F2 while the computer logo is being displayed.
Boot sequence
To set the boot seguence in the BIDS utility, activate the BIDS utility, then select Boot
from the categories listed on the top of the screen.
Setting passwords
To set a password on boot, activate the BIDS utility, then select Security from the
categories listed on the top of the screen.
Find Set Supervisor Pussword and enter a password to enable this feature. Dnce
you have entered a password far this feature, you may then enable/disable Pussword
on Boot.
Remember to select FIB to properly save and exit the BIDS utility when you are done
making changes.