P2 Cards; Inserting P2 Cards; Removing P2 Cards - Panasonic AG-HPX301E Operating Instructions Manual

P2 Cards

Inserting P2 Cards

 NOTE
When using the camera recorder for the first time, be sure to
set the time data beforehand.
For details, refer to [Setting Date and Time of Internal Clock]
(page 26).
1
 TurnonthePOWERswitch.
2
 Openthecardslotcover.
3
 InsertaPcardinaPcardslot.
• Press in the card until the eject button pops up.
Insertthecardwiththe
logofacingup.

Slotcover
EJECTbutton
4
 Pushtheejectbuttonthatpopsuptotheright.
• I nsert a P2 card into the AG-HPX301E. The P2
CARD ACCESS LED for the appropriate slot
indicates the status of the P2 card.
For details, refer to [P2 CARD ACCESS LED and
status of P2 cards] (page 29).
PCARDACCESSLED
5
 Closethecardslotcover.
 NOTE
• T o prevent cards from falling out, dust from entering and
reduce the risk of exposure to static electricity, close the card
slot cover before moving the camera.
• F ormat P2 cards only on a P2 card device.

Removing P2 Cards

1
 Openthecardslotcover.
2
 Raisetheejectbutton.
3
 ThendepresstheejectbuttontoreleasetheP
card.
Raisetheejectbutton. Presstheraisedeject
buttontoremoveaP
card.