Genlock And Time Code Input/Output Connection And Setup; Counter Setting And Display - Panasonic AG-HPX301E Operating Instructions Manual

GENLOCK and time code input/output connection and setup

Camera operating conditions
Video and reference
Recording
signal to be output
format
externally
SDI OUT (1080i)
VIDEO OUT
1080i
SDI OUT (1080i)
VIDEO OUT
SDI OUT (720P)
VIDEO OUT
720P
SDI OUT (720P)
VIDEO OUT
SDI OUT (576i (480i))
576i (480i)
VIDEO OUT

Counter Setting and Display

Pressing the COUNTER button to view the counter displays the counter value on the time code indicator in the LCD and in
the viewfinder. The counter value is indicated in "Hour : Minute : Second" format. The counter value is not displayed during
playback.
The menu option REC COUNTER in the DISPLAY SETUP screen can be set to display two types of counters.
TOTAL: p rovides a continuous count until reset by pressing the COUNTER RESET button. The counter value is retained
when P2 cards are replaced and when the power is turned off.
CLIP: T he counter is reset to 0 at the start of each recording and allows you to keep track of clip recording time while
shooting the current clip.
 NOTE
• P ressing the RESET button when the counter value is displayed resets the counter to 0.
• T he counter value indicates values in the range between 0:00:00 and 9:59:59 in 1-second steps.
Camera setup
GENLOCK input GL PHASE
SDI
1080i
COMPOSITE
SDI
SD (576i (480i))
COMPOSITE
SDI
720P
COMPOSITE
SDI
SD (576i (480i))
COMPOSITE
SD (576i (480i)) Disabled
GENLOCK input and camera output phase
(In phase:  Out of phase: ×)
VIDEO OUT,
SDI OUT (HD)
SDI OUT (SD)
90H delay

90H advance

90H delay

90H advance

120H delay

120H

advance
120H delay

120H

advance
No output

TC OUT




×
×


