White Shading Compensation - Panasonic AG-HPX301E Operating Instructions Manual

White Shading Compensation

The camera can use DEFAULT (fixed value) and three user
adjustable functions (USER1, USER2, USER3) to store
white shading compensation data.
Select SHADING SELECT in the setting menu LENS SETUP
screen to set compensation data. Selecting OFF turns off
shading compensation.
Selecting White Shading Compensation
Data
1
 SelectSHADINGSELECTinLENSSETUP,
thenpresstheJOGdialbutton.
F or details on menu operation, refer to [Using the
menus] (page 125).
LENS SETUP
SHADING SELECT
SHADING(USER)
CAC
CAC PROPERTY
CAC CARD READ
CAC FILE DELETE
CAC FILE INIT
IRIS ADJUST
PUSH MENU TO RETURN
2
 UsetheJOGdialbuttontoselectDEFAULT,
USER1,USER,USERorOFFandpressthe
JOGdialbutton.
• T o adjust the white shading, select USER1, USER2
or USER3.
• T he USER1, USER2 or USER3 settings do not
contain any compensation data by default.
• D EFAULT stores compensation data that suits
XT17x4.5BRM-K14. For lenses other than those
above, perform the "White Shading Adjustment"
described below.
LENS SETUP
SHADING SELECT
SHADING(USER)
CAC
CAC PROPERTY
CAC CARD READ
CAC FILE DELETE
CAC FILE INIT
IRIS ADJUST
PUSH MENU TO RETURN

DEFAULT
>>>
ON
>>>
>>>
>>>
>>>
>>>
DEFAULT
USER1
USER2
USER3
OFF
>>>
>>>
>>>
White Shading Adjustment
 NOTE
Coloring may occur in the vertical direction near the open
setting of the lens iris even when the white shading has been
adjusted. This is an optical characteristic and not indicative of
a failure.
1
 Placethecameraintheadjustmentmode.
(1) M ount a lens on the camera.
• D o not forget to connect the lens cable.
(2) T urn the shutter switch off and set 0 dB gain.
(3) I f the lens comes with an extender, disengage it.
(4) O pen the setting menu LENS SETUP screen
and select USER1, USER2 or USER3 under
SHADING SELECT.
(5) U se the JOG dial button to select SHADING
(USER), select EXECUTE and press the JOG dial
button.
• T he message "CHECK LUMINANCE LEVEL
ZEBRA ON VF" appears.
LENS SETUP
SHADING SELECT
SHADING(USER)
CAC
CAC PROPERTY
CAC CARD READ
CAC FILE DELETE
CAC FILE INIT
IRIS ADJUST
PUSH MENU TO RETURN
CHECK LUMINANCE LEVEL
ZEBRA ON VF
SHADING: USER1 SET OK?
YES
NO
USER1
RETURN
EXECUTE
>>>
>>>
>>>
>>>
>>>
PUSH SET