Interval Recording (Interval Rec); One-Shot Recording (One Shot Rec) - Panasonic AG-HPX301E Operating Instructions Manual

Interval recording (INTERVAL REC)

This function is used to record 1 frame at the time interval
set in the INTERVAL TIME item.
1frame 1frame
recording recording
SetINTERVAL SetINTERVAL
TIMEsetting TIMEsetting
1
 CheckthattheSYSTEMSETUPscreenisset
upasdescribedonpage.
For details on menu operation, refer to [Using the
menus] (page 125).
2
 SelectINTERVALinthemenuoptionREC
FUNCTIONintheRECORDINGSETUP
screen.
3
 SetthetimeinthemenuoptionINTERVAL
TIMEintheRECORDINGSETUPscreen.
4
 PresstheRECbutton.
• T he camera will repeat 1-frame recording for the
time interval set in the INTERVAL TIME option.
• P ress the STOP button to stop recording.
• T o cancel this function, turn the camera off or
select NORMAL in the REC FUNCTION option.
• T he following indications appear to the left of the
operation status display.
• During recording: "I-REC" stays lit.
• D uring a pause: "I-PAUSE" stays lit.
When a setting of less than 2 seconds is made
in step 3, "I-REC" blinks according to time
setting during recording.
• When stopped: "I-" in "I-PAUSE" blinks.
 NOTE
• The pre-recording function is not available.
• Sound is not recorded.
• D ata recorded (until the STOP button is pressed) in
this mode is recorded as a single file.
• T here is no output from the DVCPRO/DV connector.
0
One-shot recording
(ONE SHOT REC)
This function records a single shot at each unit of time
1frame
which has been set.
recording
1
(time)

2

3

4

CheckthattheSYSTEMSETUPscreenisset
upasdescribedonpage.
For details on menu operation, refer to [Using the
menus] (page 125).
SelectONESHOTinthemenuoptionREC
FUNCTIONintheRECORDINGSETUP
screen.
SetthetimeinthemenuoptionONESHOT
TIMEintheRECORDINGSETUPscreen.
PresstheRECbutton.
• T he camera will pause recording after making a
recording that lasts the duration set in step 3.
• Press the STOP button to stop recording.
• T o cancel this function, turn the camera off or
select NORMAL in the REC FUNCTION option.
• T he following indications appear to the left of the
operation status display.
• During recording: "I-REC" stays lit.
• During a pause: "I-PAUSE" stays lit.
• When stopped: "I-" in "I-PAUSE" blinks.
 NOTE
• N o other functions are available during operation.
• T he pre-recording function is not available.
• S ound is not recorded.
• D ata recorded (until the STOP button is pressed) in
this mode is recorded as a single file.
• T here is no output from the DVCPRO/DV connector.
• D uring continuous one-shot recording, recording
operation speed may be decreased.