Restoring Factory Default Settings - Cisco WAP2000 Administration Manual

Configuring the WAP2000 Access Point
Configuring Administration Settings
!
CAUTION
STEP 1
STEP 2
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide

Restoring Factory Default Settings

The Administration > Factory Default window allows you to restore the access
point's factory default settings.
Restoring the factory default settings deletes all your custom settings. To preserve
your custom settings, save them to disk before restoring the factory default
settings, as described in
page 60.
To restore the factory default settings of the access point, follow these steps:
Click Administration > Factory Default.
Click Restore Factory Default.
Your access point reboots and comes back up with the factory default settings in
a few seconds.
"Managing the Access Point's Configuration," on
6
57