Configuring Wpa2-Enterprise - Cisco WAP2000 Administration Manual

Configuring the WAP2000 Access Point
Configuring Wireless Settings
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide

Configuring WPA2-Enterprise

This option features WPA2 used in coordination with a RADIUS server for client
authentication.
Use WPA2-Enterprise only when a RADIUS server is connected to the access
point.
To configure the WPA2-Enterprise wireless security settings for the access point,
follow these steps:
Click Wireless > Security.
From the Security Mode drop-down menu, select WPA2-Enterprise.
To enable wireless isolation across SSIDs select Enabled from the drop-down
menu. Otherwise select Disabled.
To enable wireless isolation within SSID, select Enabled from the drop-down
menu. Otherwise select Disabled.
6
33