Verifying The Hardware Installation - Cisco WAP2000 Administration Manual

Installing the WAP2000 Access Point

Verifying the Hardware Installation

Verifying the Hardware Installation
NOTE
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
The LEDs on the front panel light up as soon as the WAP2000 powers on.
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the LED states, as described in
If you need help resolving a problem, visit the Cisco Small Business Support
Community at www.cisco.com/go/smallbizsupport. For technical documentation
and other links, see Appendix D, "Where to Go From Here."
Chapter 3, "Product
4
Overview.".
12