Configuring Security - Cisco WAP2000 Administration Manual

Configuring the WAP2000 Access Point
Configuring Wireless Settings
STEP 1
STEP 2
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide

Configuring Security

The Wireless > Security window displays the wireless security settings of the
access point, including Wi-Fi Protected Access (WPA) and Remote Authentication
Dial-In User Service (RADIUS). WPA is a stronger security standard than Wired
Equivalent Privacy (WEP) encryption, and is forward-compatible with IEEE 802. 1 1i.
Enterprise modes use a RADIUS server for authentication.
To configure the wireless security settings for the access point, follow these
steps:
Click Wireless > Security.
Configure wireless isolation between SSIDs:
a. From the Select SSID drop-down menu, select any of the SSID names
configured previously on the Basic Wireless Settings window.
b. To isolate wireless clients from each other, from the Wireless Isolation
(between SSID) drop-down menu, select Enabled. Otherwise, select Disabled.
Wireless isolation between SSIDs prevents eavesdropping on the network. When
it is enabled, wireless frames received on this access point are not forwarded to
other wireless networks (SSIDs).
6
25