Configuring Radius - Cisco WAP2000 Administration Manual

Configuring the WAP2000 Access Point
Configuring Wireless Settings
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide

Configuring RADIUS

This security mode is also known as Dynamic WEP with IEEE 802. 1 X. A RADIUS
server is used for client authentication and WEP is used for data encryption.
The WEP key is automatically generated by the RADIUS server.
Manual WEP key is no longer supported to ensure compatibility with Microsoft's
Windows implementation.
To configure the RADIUS wireless security settings for the access point, follow
these steps:
Click Wireless > Security.
From the Security Mode drop-down menu, select RADIUS.
To enable wireless isolation across SSIDs, select Enabled from the drop-down
menu. Otherwise, select Disabled.
To enable wireless isolation within SSID, select Enabled from the drop-down
menu. Otherwise, select Disabled.
6
37