Navigating The Web-Based Utility - Cisco WAP2000 Administration Manual

Getting Started

Navigating the Web-Based Utility

STEP 3
STEP 4
STEP 5
STEP 6
Navigating the Web-Based Utility
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
Access Point depends upon the type of architecture and operating system you
are using. Use your computer's local Help and Support functionality and search for
"IP Addressing."
Launch a web browser, such as Internet Explorer or Mozilla Firefox.
In the Address field enter the default DHCP address and press the Enter key.
In the User Name and Password fields enter the default of admin.
Click OK.
The Setup window of the web-based utility appears.
The web-based utility consists of five main windows:
• Setup
• Wireless
• AP Mode
• Administration
• Status
Additional windows branch out from these main windows. For a basic network
setup, you may only need to use the following windows of the web-based
configuration utility:
• Setup—Enter your basic network settings.
• Management—Click Administration > Management and create a new
password to replace the default password (admin).
• Wireless—To change the default SSID, click Wireless > Basic Settings and
make the necessary changes. To change the level of security, click
Wireless > Security and make the necessary changes.
5
14